SGS MSi employs many methods of hardness testing. ASTM E10 Brinell Testing is among the most common processes we perform on a routine basis.
Using ASTM E10 as our accredited test specification, Brinell testing is a method of hardness testing using a tungsten carbide ball as the indenter. The indenter is brought into contact with the planar surface of a test specimen and held with a test force for a specified dwell time. The magnitude of the force and the diameter of the ball can vary depending on the material being tested. A typical test (on low alloy steel, for example) uses a 3000kgf force with a 10mm ball.
Brinell Hardness Test Methods & Specifications
The following is a listing of specifications that are in accordance with our A2LA and ISO accreditation.
- Brinell: 187.5, 500, 750, 3000Kg
- ASTM E10
Brinell Testing Laboratory
The Brinell hardness of the material is determined by the diameter of the resulting indentation, measured in at least two perpendicular directions and taken as an average. Harder materials yield smaller indentations.
Brinell hardness can provide useful information about the mechanical properties of the material, such as approximate tensile strength, wear resistance, and ductility.
Please contact our sales team to discuss your testing needs and cost estimation.